星期三, 7月 23, 2008

Scratch build 1/48 airship III

Now I’m going to the airship tail detail that the original design the tail as rudder such as airplane rudder.I design both rudders can be moveable left to right, anyhow I love to making things workable but I’ll stick them at the final stage.At the front of the tail there is a bait thrower and rope winch which all scratch builds by 1.2 mm plastic plate.The steering wheel located in the middle of hull.I had chop the thin balsa wood as deck then apply oil paint;Used light sand paper to rub the surface when dry.
接著繼續尾部的細節,原來飛船的設計就像是一條魚的形狀而尾部也就像是魚尾的形狀;只是會有兩片並且是用來控制飛行方向,其功能就像是飛機的尾舵一樣. 我喜歡可動的關節而尾舵先將關節作出;尾舵就等最後在裝上即可.在尾舵的前方有個魚餌投擲器,也都是用1.2mm改造版製作成的,當然也可以活動囉,旁邊則是一個絞盤器.駕駛盤設在船身中央,駕駛盤也花了不少時間製作成,先將兩片改造版黏好,待乾後再挖出洞洞再削出正確的形狀.其實在完成船身時就超期待鋪上甲板,那種感覺超棒的哩!以薄片巴沙木切成1/48比例的細長方形再小心黏上船身.乾後再用稀釋油畫顏料塗上,待乾再用細砂紙輕輕磨表面.










沒有留言: