Motor Storm 1/6 Part.3
It’s time to color the frame; I used TAMIYA acrylic X-16(purple) as frame color. For sure, this one is not going to be military version. I spray 3~4 time for the frame that really need patience when coloring; I made the feet holder at the bottom of frame because I removed the treadle at the beginning; place the 0.5mm aluminum tube to check the size but not to glue them yet.
我挑了鮮紫色當作是這機車骨架的底色, 現有的田宮的壓克力X-16為主色, 很明顯這次不再是以軍事為題材了. 噴了3~4次的底色, 上色的確需要很有耐心而不是一次就能完全搞定. 在底色上完後做了一對金屬的腳踏條的支撐器, 但是腳踏條還不能固定上去, 而是必須留到最後的步驟再固定上去.
I made a ladder shaped and triangle shape of metal box which had been soldering; the box is ready for a set of spring that it is place at the bottom of seat. I glue the metal box with instant glue because soldering was not work between two metals; I made a set of spring with wire that it is for decoration that there is no function at all, then I soldering the spring on the metal box.
我用悍烙鐵悍了梯形、三角形的金屬盒, 這是用來當作是座椅彈簧的支撐處; 原先以悍絡鐵來固定這個金屬盒與機車骨架而並未產生作用, 反倒是快乾膠才是王道, 一下就搞定. 以鐵絲做成的非實用彈簧, 只是做出形狀而已. 彈簧與鐵盒則是以悍絡鐵固定.
I glue a plastic bar on the handle which makes it strength.
在把手之間黏上一支橫擺的膠條來強化它.
我挑了鮮紫色當作是這機車骨架的底色, 現有的田宮的壓克力X-16為主色, 很明顯這次不再是以軍事為題材了. 噴了3~4次的底色, 上色的確需要很有耐心而不是一次就能完全搞定. 在底色上完後做了一對金屬的腳踏條的支撐器, 但是腳踏條還不能固定上去, 而是必須留到最後的步驟再固定上去.
I made a ladder shaped and triangle shape of metal box which had been soldering; the box is ready for a set of spring that it is place at the bottom of seat. I glue the metal box with instant glue because soldering was not work between two metals; I made a set of spring with wire that it is for decoration that there is no function at all, then I soldering the spring on the metal box.
我用悍烙鐵悍了梯形、三角形的金屬盒, 這是用來當作是座椅彈簧的支撐處; 原先以悍絡鐵來固定這個金屬盒與機車骨架而並未產生作用, 反倒是快乾膠才是王道, 一下就搞定. 以鐵絲做成的非實用彈簧, 只是做出形狀而已. 彈簧與鐵盒則是以悍絡鐵固定.
I glue a plastic bar on the handle which makes it strength.
在把手之間黏上一支橫擺的膠條來強化它.
Comments