Making 1/6 leather shoes

First trying to do 1/6 scale miniature shoes because I have received an designation from French friend;I’m taking this challenge to give it a try that see how would it be,I have lots of for this which I never did it before that I’m asking someone who knows about leather knowledge before I started,I also taking reference from Tony Barton tutorial which give the idea of how to making shoes.
第一次製作1/6人偶皮鞋也是因為法國玩家要求製作而嘗試製作;其實不知道能不能完成這的訂單而硬著頭皮撩下去也是我常做的事,不想太多囉!先收集相關資料比較切實.先是參考英國人偶大師Tony Barton的教學及詢問懂皮雕的人這方面的常識,當然最重要的還是自己動手了.

Here is where I'm trying to make German U-Boat shoes,the image was provided from French 1/6 hobbyist who intend to make this shoes.This is third times that I’ve been authorize to make 1/6 scale rare items.
由法國玩家委託製作這雙他心目中的德軍U-Boat皮鞋,其實是第三次被委託製作1/6的東東,蠻好玩的!




1. The First requirement is for a last mould your shoe around;I make them form wood which I simply glue the two pieces of wood then cut into shape that I desire;Sandpaper for the entire shape.Remember the last mould size have to be smaller then actual size because leather thickness needs to be considering.
首先以2塊黏好了的木頭刻出簡易腳型,砂紙處理表面.腳型會是比正常的尺寸來的小,因為要將皮的厚度算進去的.



2. Cutting 2 pieces of tetragon and 2 pieces of rectangle leather;Soak them in water then cover on the wood mould with sculpting tool gently work it to fit over the front of the last.The stitch for holding position.
第二,切下四方形(長、寬5cm)及長方形(長約6cm、寬約3cm)各2片;將這4片放入水裡浸濕,鋪在木模上後將鞋的底部以工具壓出形狀;鞋型大致就出現,大頭針用來固定位置的.




3. The 2 pieces of rectangle for the back;Wrap the back of the wood mould heel when wet,mark the shape with pen then cut it to the right shape.Again,the bottom part did the same way as second stage.
第三,2個長方形是給腳踝的部位.同樣在濕的時候緊包住木模的後腳踝;用筆畫出需要的形狀後再拿開來剪裁.


4. Sewing two parts together;Cutting the spare part into equal parts that there are ready for fold beneath.
第四,將這前後部份縫合;邊緣多餘部分則剪出大約0.6mm的剩餘空間,切出不等的齒狀準備往內摺用.



5. Used fine artificial leather as inner soles coz it is thin;Folding the toothlike part to glue with soles.Used 2 mm cow skin as sole;another 2 mm for heel.
第五,以薄的人造皮當做是鞋內底襯;將齒狀的部份上膠水後往內摺,鞋子的形狀大致呈現¡,再以2mm的小牛皮切出鞋底的形狀後塗上膠水黏牢就差不多完成了.




6. Punching lace hole and apply Gunze Mr. Masking as another gradation leather coz the miniature shape is too curve and small that it is not possible to make by real leather.I used Gunze Mr. Masking instead that looks good as shown,Last I painted with black acrylic.
第六,打出鞋帶的洞,以Gunze 遮蓋液塗上色的皮革部分;其實這部份的皮革很難以真品呈現,最終還是小比例的因素而另尋其他方式代替.倒是遮蓋液塗上時有些像橡膠的感覺,最後在塗上黑色壓克力漆即完成.



Comments

偉兄 遮蓋液可能不是個好主意喔
其實遮蓋液就是稀釋的latex 很容易劣化
去天水路買的latex可能還能撐久一點
不過一年後大概都爛光光了
有考慮用矽膠嗎?
感謝建議!當初竟然沒想到要使用矽膠,攪盡腦汁想不到有什可以當材料.希望那遮蓋液不會產生任何變化.這位是模友嗎!
Jason Chyi said…
老闆!我要NIKE的啦!有氣墊的那種!
老大你也太強了吧~鞋你都能做!!!讚啦!

Popular Posts